David A. Osage, P.E., ASME Fellow

Mr. Osage has over 48 years of experience in the refining and petrochemical industry both as an owner-user and consultant.  He is responsible for engineering consulting services for pressure containing systems including pressure vessels, piping, and tankage.  His responsibilities include stress and thermal analysis of pressure vessels, piping, and tankage; development and maintenance of Computed Aided Engineering (CAE) systems for plant engineering; advanced finite element methods; Fitness-For-Service analysis of in-service equipment; high-temperature design and remaining life assessment; fracture mechanics; failure analysis and resolution of lessons-learned; development and maintenance of engineering standards; implementation of design changes and problem solving at shutdowns; and troubleshooting and recommendations for repairs to damaged equipment.

Mr. Osage provides engineering consulting for all levels of refinery capital projects including preparation of design specifications, coordination of design reviews, development of engineering standards for refinery equipment, and QA/QC procedures for project administration.  He also has extensive experience in preparation and delivery of training courses to practicing engineers in industry-related technologies such as Fitness-For-Service.  As an Adjunct Visiting Assistant Professor at Stevens Institute of Technology, Mr. Osage taught graduate level courses in strength of materials and elasticity, structural analysis and finite element methods, and structural optimization.

Mr. Osage is internationally recognized as an industry expert and leader in the development and use of FFS technology.  As the architect and principal investigator of API 579 Fitness-For-Service, he developed many of the assessment methodologies and supporting technical information.  Mr. Osage was the recipient of a Certificate of Appreciation from API for his work on API 579.  Mr. Osage has served as the chairperson and vice-chairperson for the API/ASME Joint Committee on Fitness-For-Service and was instrumental in completing the update to API 579 titled API 579-1/ASME FFS-1 Fitness-For-Service.  For his efforts on API 579-1/ASME FFS-1 and API 579-2/ASME FFS-2 Fitness-For-Service Example Problems Manual, Mr. Osage received a Resolution of Appreciation from API and a Certificate of Acclamation from ASME.

Mr. Osage also has internationally recognized expertise in the design of new equipment.  As the lead investigator and principal investigator of the new ASME B&PV Code, Section VIII-Rules for Construction of Pressure Vessels Division 2-Alternative Rules – 2007 Edition, he developed a new organization and writing style for this code and was responsible for introducing the latest developments in materials, design, fabrication, and inspection technologies.  These technologies include new models for materials behavior suitable for use in a construction code, a new brittle fracture evaluation method based on concepts from API 579-1/ASME FFS-1, updated design-by-rule methods, modern design-by-analysis procedures including the introduction of elastic-plastic analysis methods, and a new fatigue method for welded joints.  Mr. Osage received a Certificate of Acclamation from ASME for this work.  At the request of ASME, Mr. Osage authored PTB-1-2014 ASME Section VIII Division 2 Criteria and Commentary that provides a complete description of the ASME B&PV Code, Section VIII, Division 2 including technical background and an overview of the many new and updated features.  He also co-authored PTB-3-2013 ASME Section VIII – Division 2 Example Problems Manual and PTB-4 2013 ASME Section VIII-Division 1 Example Problem Manual that provide numerous examples illustrating the proper use of these construction codes.  Mr. Osage has served on the ASME Board on Pressure Technology Codes and Standards and the following ASME Section VIII committees: Section VIII Main Committee, Subgroup Design, and Subgroup on Fabrication and Inspection.  Mr. Osage was named an ASME Fellow in 2016 to honor his contributions to codes and standards development work.

Mr. Osage was the lead investigator to revamp the API Risk-Based Inspection (RBI) technology and software.  The focus of this effort is a clean-sheet rewrite of API 581 Risk-Based Inspection Technology, Second Edition, 2008 and the development of a new version of the API RBI software.  Mr. Osage is also currently working on the next generation of RBI technology where Fitness-For-Service assessment procedures will be used to compute the probability of failure for Risk-Based Inspection.

Mr. Osage is an instructor for Design-By-Analysis, Fitness-For-Service, and Repair courses offered under the ASME MasterClass Series.  ASME Master Classes are premium learning programs comprised of advanced topics aimed at experienced engineering professionals.  Master Classes emphasize learning through discussion of real-world case studies and practical applications.  ASME Master Classes are taught by widely respected industry authorities with more than 25 years’ experience in their respective fields of expertise. 

Mr. Osage is the Chairperson of the Board of the Welding Research Council (WRC).  The WRC now incorporates both the Materials Properties Council (MPC) and the Pressure Vessel Research Council (PVRC).  These councils were created by the Engineering Foundation, a coordinating organization of the major engineering societies that was formed over one hundred years ago to meet the industry’s needs for knowledge regarding the properties and performance of materials in engineering applications.  Mr. Osage will be working to ensure that the vast amount of technology and data of these organizations is preserved and made available to industry.

Awards:

1. American Petroleum Institute, Distinguished and Meritorious Service Citation, Continuous Work on API 579-1/ASME FFS-1, Fitness-for-Service, November 2022.
2. The American Society of Mechanical Engineers, Certificate of Acclamation, For Excellence in the Further Advancement of API 579-1/ASME FFS-1, Fitness-for-Service, Forward, Font Matter, parts 1,9,10 & 14, November 2022.
3. American Petroleum Institute, Distinguished and Meritorious Service Citation, Continuous Work on API 579-1/ASME FFS-1, Fitness-for-Service, November 2019.
4. ASME Fellow, 2016.
5. EY Entrepreneur Of The Year, 2014 Regional Award Winner.
6. Vistage Founding Member, December 2009.
7. The American Society of Mechanical Engineers, Certificate of Acclamation, Development of API 579-2/ASME FFS-2 2009, Fitness-for-Service Example Problem Manual.
8. The American Society of Mechanical Engineers, Certificate of Acclamation, Presentation and Facilitation of the PCC Workshop on the “Standard on Standards,” March 17 & 18, 2009, Houston, Texas.
9. The American Society of Mechanical Engineers, Certificate of Acclamation, Development of the 2007 Edition of the ASME Boiler & Pressure Vessel Code Section VIII, Division 2: Alternative Rules for Construction of Pressure Vessels.
10. The American Society of Mechanical Engineers, Certificate of Acclamation, Development of API 579-1/ASME FFS-1 2007, Fitness-For-Service.
11. The Pressure Vessel Research Council, Certificate of Excellence, Task Group on Continued Modernization of Codes, March 10, 2003.
12. The American Society of Mechanical Engineers, JPVT Journal Editor’s Choice Award, “Fitness for Service Evaluation of Ring Joint Groove Cracking,” July 25, 2001.
13. American Petroleum Institute, Certificate of Appreciation, Development of CRE API RP 579 April, 1999.
14. American Petroleum Institute, Recognition for Service for 20 years of dedicated participation in standards development activities.
15. American Petroleum Institute, Resolution of Appreciation, Development of API 579-1/ASME FFS-1, Fitness-for-Service, Second Edition.

Publications:

1. Macejko, B.R., Kummari, S.R., and Osage, D.A., Recommendations for Evaluating Resistance to Brittle Fracture for Carbon and Low Alloy Steel Equipment and Piping, WRC 599, The Welding Research Council, Shaker Heights, OH 2023.
2. D.A. Osage, “Damage Management Locations (DMLs) – Connecting Inspection Data with Asset Life-Cycle Management,” Inspectioneering, 2023.
3. D.A. Osage, D.A., Janelle, J.L., Bednarz, J., Kowalski, P., Mekker, J.G., Orosz, K.T., Sutton, N.G., and Chow, A.P., Compendium of Temperature-Dependent Physical Properties for Pressure Vessels, Piping and Tankage Materials, WRC 503, 2nd Edition, The Welding Research Council, New York, NY, 2023.
4. Gassama, E., Bifano, M.F.P., Feller, A.J., Spring, D.W., and Osage, D.A., Updating the Master S-N Curve to Account for Run-Out Data, WRC Bulletin 587, The Welding Research Council, New York, NY, 2023.
5. Osage, D.A., Baldesberger, L., O’Brien, I., Patadia, R.K., Kowalski, P., Orosz, K., and Sutton, N., Elevated Temperature Material Property Complication for Design-By-Analysis, STP-PT-096, ASME Standards Technology, LLC, Two Park Avenue, New York, N.Y. 10016-5990, 2022.
6. Waters, E.O., Rossheim, D.B., Wesstrom, D.S., and Williams, F.S.G., Implementation Team; D.A. Osage, D.A., Gassama, E., Shaughnessy, T.C., Samodell, D., Development of General Formulas for Bolted Flanges, WRC Bulletin 583, The Welding Research Council, New York, NY, 2022.
7. Kedarasetti, R., Spring, D.W., and Osage, D.A., Comparison of Methods for Evaluating Local Thin Areas in Cylinders Subject to Pressure, Moments and Forces, WRC Bulletin 593, The Welding Research Council, New York, NY, 2022.
8. Panzarella, C.H., Spring, D.W., Gassama, E., and Osage, D.A., The Alpha-Omega Loss of Containment Model for HTHA with Guidelines for FFS, WRC Bulletin 586, The Welding Research Council, New York, NY, 2021.
9. Panzarella, C.H., Osage, D.A., Spring, D.W., Gassama, E., and Cochran, J., The α–Ω HTHA Model and the Time-Dependent Prager Curves, WRC Bulletin 585, The Welding Research Council, New York, NY, 2021.
10. Anderson, T.L., Brown, G.W., and Osage, D.A., An Engineering Approach for Determining Minimum Pressurization Temperature (MPT) in Heavy-Wall 2.25 Cr – 1 Mo Steel Reactors in Hydrogen Service, WRC Bulletin 563, The Welding Research Council, New York, NY, 2021.
11. Macejko, B.R., Osage, D.A., Overview of API 579-1/ASME FFS-1 With an Emphasis on Data and Inspection Requirements, WRC Bulletin 584, The Welding Research Council, New York, NY, 2020.
12. Sutton, N.G., Baldesberger, L.A., Osage, D.A., Recognition of UNS S34752 (Advanced 347 AP) Alloy in API 579-1/ASME FFS-1 and API Std 530, WRC Bulletin 582, The Welding Research Council, New York, NY, 2020.
13. Sutton, N.G., Baldesberger, L.A., Osage, D.A., Recognition of UNS K91060 (Alloy 115, aka T115) Alloy in API 579-1/ASME FFS-1 and API Std 530, WRC Bulletin 576, The Welding Research Council, New York, NY, 2020.
14. Gassama, E., Cochran, J.D., Panzarella, C.H., Osage, D.A., The MPC Lot-Centered Analysis Method for Determining High Temperature Strength Parameters, WRC Bulletin 564, The Welding Research Council, New York, NY, 2020.
15. Sims, J.E., Chronister, D.J., Prager, M., Osage, D.A., Repair Manual for Coke Drums, WRC Bulletin 556, The Welding Research Council, New York, NY, 2020.
16. Prager, M., Sutton, N.G., Osage, D.A., Recognition of UNS S34751 (347LN, aka 347AP) Alloy in API 579-1/ASME FFS-1 and API Std 530 – 2nd Edition, WRC Bulletin 558, The Welding Research Council, New York, NY, 2020.
17. Prager, M., Osage, D.A., Panzarella, C.H., Sutton, N.G., O’Brien, I., Baldesberger, L.A., Evaluation of Material Strength Data for Use in API Std 530 – 3rd Edition, WRC Bulletin 541, The Welding Research Council, New York, NY, 2020.
18. K.R. Wichman, K.R., Hopper, A.G., Mershon, J.L., Implementation Team; Osage, D.A.., Buchheim, M.E., Amos, D.E., Shaughnessy, T.C., Samodell, D.A., Straub, M., Precision Equations and Enhanced Diagrams for Local Stresses in Spherical and Cylindrical Shells Due to External Loadings for Implementation of WRC Bulletin 107, WRC Bulletin 537, 2^nd Edition, The Welding Research Council, New York, NY, 2020.
19. Prager, M., Sutton, N.G., Patadia, R., Macejko, B., Prueter, P., Osage, D.A., Guidelines for the Approval of New Materials in WRC Bulletin 541, API Std 530, and API 579-1/ASME FFS-1, WRC Bulletin 546, The Welding Research Council, New York, NY, 2020.
20. Panzarella, C.H., Gassama, E., Cochran, J., Osage, D.A., The Valid Stress Range for the MPC Omega Model in API 579-1/ASME FFS-1 2016 and the Creep Rupture Model in WRC 541, WRC Bulletin 554, The Welding Research Council, New York, NY, 2019.
21. Spring, D.W., Panzarella, C.H., Osage, D.A., Revisiting the Bree Diagram: Derivation with Temperature Dependent Properties, WRC Bulletin 575, The Welding Research Council, New York, NY, 2019.
22. Stenta, A., Gassama, E., Spring, D., Panzarella, C., Cochran, J., Osage, D.A., Standardization of Fatigue Methods for Use in API 579-1/ASME FFS-1, WRC Bulletin 550, The Welding Research Council, New York, NY, 2019.
23. Osage, D.A., “Janelle, J.L., Bednarz, J., Kowalski, P., Mekker, J.G., Orosz, K.T., Sutton, N.G., Compendium of Temperature-Dependent Physical Properties for Pressure Vessels, Piping and Tankage Materials, WRC Bulletin 503, The Welding Research Council, New York, NY, 2019.
24. Xianjun, P., Dong, P., Song, S., Osage, D.A., “A Comprehensive Structural Strain Method Incorporating Strain-Hardening Effects: From LCF to Ratcheting Evaluations,” ASME PVP2018-84860, Proceedings of the ASME 2018 PV&P Conference, Prague, Czech Republic, July 15-20, 2018.
25. Osage, D.A., Pingsha, D., Spring, D., “Fatigue assessment of welded joints in API 579-1/ASME FFS-1 2016 – existing methods and new developments,” 7th International Conference on Fatigue Design 2017, Senlis, France, 2017.
26. Prueter, P.E., Kummari, S.R., Osage, D.A., “A Fracture Mechanics-Based Approach to Establish Minimum Pressurization Temperature Envelopes,” ASME PVP2017-65805, Proceedings of the ASME 2017 PV&P Division Conference, Waikoloa, HI, July 16-20, 2017.
27. Osage, D.A., Spring, D.W., Kummari, S.R., Prueter, P.E, Anderson, T.L., Wallin, R.W., Recommendations for Establishing the Minimum Pressurization Temperature (MPT) for Equipment, WRC Bulletin 562, The Welding Research Council, New York, NY, 2017.
28. Osage, D.A., Stenta, A., “Fatigue Assessment for In-Service Components – A New Part for API 579-1/ASME FFS-1 Fitness-For-Service,” ESOPE Conference, Paris, France, 2016.
29. Prager, M., Osage, D.A., Editors, Current Concepts for Life Assessment of Pressure vessels and Piping, WRC Bulletin 568, The Welding Research Council, New York, NY, 2016.
30. Stenta, A., Gassama, E., Spring, D., Cochran, J., Panzarella, C., Osage, D.A., “Summary and Applications of the New Fatigue Rules in Part 14 of API 579-1/ASME FFS-1 and WRC 550,” PVP2016-63678, Proceedings of the ASME 2016 Pressure Vessels & Piping Division Conference, PVP-2016, Vancouver, BC, Canada, July 17-21, 2016.
31. Spring, D., Panzarella, C., Osage, D.A., “Revisiting the Bree Diagram,” PVP2016-63635, Proceedings of the ASME 2016 Pressure Vessels & Piping Division Conference, PVP-2016, Vancouver, BC, Canada, July 17-21, 2016.
32. Prager, M., Osage, D.A., Current Concepts for Life Assessment of Pressure Vessels and Piping, WRC Bulletin 568, The Welding Research Council, New York, NY, 2016.
33. Osage, D.A., “Fatigue Assessment for In-Service Components – A New Part for API 579-1/ASME FFS-1 Fitness-For-Service,” 6th Fatigue Design Conference, Fatigue Design 2015, Procedia Engineering 133 (2015) 320-347, 2015.
34. Prager, M., Osage, D.A., Recognition of UNS 34751 (347LN, aka 347AP) Alloy in API 579-1/ASME FFS-1 and API Std 530, WRC Bulletin 558, The Welding Research Council, New York, NY, 2015.
35. Prager, M., Osage, D.A., Panzarella, C., Evaluation of Material Strength Data for Use in API Std 530 – 2nd Edition, WRC Bulletin 541, The Welding Research Council, New York, NY, 2015.
36. Dewees, D., Prueter, P., Kummari, S., Thome, T., Smith, K., Bifano, M., Panzarella, C., Osage, D.A., Development of Revised Weld Residual Stress Guidance for Fitness-For-Service Assessment in API 579-1/ASME FFS-1, The Welding Research Council, New York, NY, 2015.
37. K.R. Wichman, K.R., Hopper, A.G., Mershon, J.L., Implementation Team; Osage, D.A.., Buchheim, M.E., Amos, D.E., Shaughnessy, T.C., Samodell, D.A., Straub, M., Precision Equations and Enhanced Diagrams for Local Stresses in Spherical and Cylindrical Shells Due to External Loadings for Implementation of WRC Bulletin 107, WRC Bulletin 537, 1^st Edition, The Welding Research Council, New York, NY, March 2014.
38. Osage, D.A., Macejko, B., Brown, R., “Proposed Modifications to API 579-1/ASME FFS-1 2007 Fitness-For-Service,” PVP2014-28451, Proceedings of the ASME 2014 Pressure Vessels & Piping Division Conference, PVP-2014, Anaheim, CA, July 20-24, 2014.
39. Panzarella, C., Cochran, J., Osage, D.A., Improvements in the Thinning Damage Factor Calculation Planned for the 3rd Edition of API RP 581, WRC Bulletin 545, The Welding Research Council, New York, NY, 2014.
40. Prager, M., Osage, D.A., Panzarella, C., Brown, R., “Development of a Material Databook for API STD 530,” PVP2014-28538, Proceedings of the ASME 2014 Pressure Vessels & Piping Division Conference, PVP-2014, Anaheim, CA, July 20-24, 2014.
41. Henry, P.A., Osage, D.A., “Proposed Modifications to API 581 Risk-Based Inspection Technology,” ESOPE Conference, Paris, France, 2013.
42. Prager, M., Osage, D.A., “Development of a Material Databook for API Std 530,” ESOPE Conference, Paris, France, 2013.
43. Prager, M., Osage, D.A., Qualifying NDE Equipment and Personnel for Fitness-For-Service Assessments at Refineries and Electric Utilities,” ESOPE Conference, Paris, France, 2013.
44. Osage, D.A., Sowinski, J.C, ASME Section VIII Division 2 Criteria and Commentary, PTB-1-2013, ASME, New York, NY, 2013.
45. Sowinski, J.C., Osage, D.A., Brown, R.G., ASME Section VIII – Division 2 Example Problems Manual, ASME PTB-3-2013, ASME, 2013.
46. Sowinski, J.C., Osage, D.A., ASME Section VIII – Division 1 Example Problems Manual, ASME PTB-4-2013, ASME, 2013.
47. Dong, P., Prager, M., Osage, D.A>, “The Design Master S-N Curve in ASME Div. 2 Rewrite and its Validations,” Welding in the World, February 7, 2013.
48. Dong, P., Hong, J.K., Osage, D.A., Prager, M., “Assessment of ASME’s FSRF Rules for Vessel and Piping Welds using a New Structural Stress Method,” Welding in the World, February 7, 2013.
49. Osage, D.A., Prager, M., “Technical Basis of Material Toughness Requirements in the ASME Boiler and Pressure Vessel Code, Section VIII, Division 2,” Journal of Pressure Vessel Technology, ASME, Vol. 134, pages 031001-1-031001-13, June 2012.
50. Sowinski, J.C., Osage, D.A., ASME Section VIII – Division 1 Example Problems Manual, ASME PTB-4-2012, ASME, 2012.
51. Osage, D.A., Rodery, C.D., Sowinski, J.C., Pastor, T.P., Brown, R.G., Henry, P.A., Chapter 22, “Section VIII: Division 2 – Alternative Rules,” IN:  Rao, K.R., Companion Guide to the ASME Boiler & Pressure Vessel Code, Fourth Edition, ASME Press, 2012.
52. Dewees, D., Osage, D.A., Prueter, P.E., Dodds, R.H., “Three-Dimensional Analysis of Crack Driving Force in Simulated Weld Residual Stress Fields,” 9th International Trends in Welding Research Conference, Hilton Chicago/Indian Lakes Resort, June 6, 2012.
53. Prager, M., Osage, D.A., “Data and Design Approaches for Reliable Elevated Temperature Service,” Presented at the Two-Day International Conference on: Use of 9-12 Cr Martensitic, P23/24, Traditional Low Alloys Steels, Stainless Steels and Ni-based Alloys in USC Power Plants, Chicago, August 4-5, 2011.
54. Cao, Z., Bildy, L., Osage D.A., Sowinski, J.C., “Development of Design Rules for Nozzles in Pressure Vessels for the ASME B&PV Code, Section VIII, Division 2,” PVP2011-57356, Proceedings of the ASME 2011 Pressure Vessels & Piping Division Conference, PVP-2011, Baltimore, MD, July 17-21, 2011.
55. Osage, D.A., Thornton, D.R., Henry, P.A., “Life-Cycle Management of Pressurized Fixed Equipment,” PVP2011-57903, Proceedings of the 2011 ASME Pressure Vessels & Piping Conference, PVP-2011, Baltimore, MD, July 17-21, 2011.
56. Sowinski, J.C, Osage, D.A., Brown, R.G., ASME Section VIII – Division 2 Example Problems Manual, ASME PTB-3-2010, ASME, 2010.
57. Prager, M., Osage, D.A., Staats, J., Macejko, B., Development of Material Fracture Toughness Rules for the ASME BP&V Code, Section III, Division 2, WRC Bulletin 528, The Welding Research Council, New York, NY, 2010.
58. Cao, Z., Bildy, L., Osage, D.A., Sowinski, J.C., Development of Design Rules for Nozzles in Pressure Vessels for the ASME BP&V Code, Section VIII, Division 2, WRC Bulletin 529, The Welding Research Council, New York, NY, 2010.
59. Dong, P., Hong, J.K., Osage, D.A., Dewees, D.J., Prager, M., The Master S-N Curve Method: An Implementation for Fatigue Evaluation of Welded Components in The ASME B&PV Code, Section VIII, Division 2 and API 579-1/ASME FFS-1, WRC Bulletin 523, The Welding Research Council, New York, NY, 2010.
60. Osage, D.A., Thornton, D.T., Henry, P.A., “Life-Cycle Management of Pressurized Fixed Equipment,” ESOPE Conference, Paris, France, 2010.
61. Osage, D.A., Prager, M., “Technical Basis of Material Toughness Requirements in the ASME B&PV Code, Section VIII, Division 2,” ASME PVP Conference, 2010.
62. Prager, M., Osage, D.A., “Background to the Development of ASME B&PV Code Case 2605 – Extension of 2.25Cr-1Mo-V Alloy into the Creep Range,” ESOPE Conference, Paris, France, 2010.
63. Sowinski, J.C., Cao, Z., Osage, D.A., Carr, N.A., Brubaker, J.E., Development of Design Rules for Conical Transitions in Pressure Vessels for the ASME B&PV Code, Section VIII, Division 2, WRC Bulletin 521, The Welding Research Council, New York, NY, 2009.
64. Osage, D.A., Rodery, C.D., Karcher, G.G., Pastor, T.P., Brown, R.G., Henry, P.A., Chapter 22, “Section VIII: Division 2 – Alternative Rules,” In:  Rao, K.R., Companion Guide to the ASME Boiler & Pressure Vessel Code, Third Edition, ASME Press, 2009.
65. Osage, D.A., “Modernization of Pressure Vessel Design Codes, ASME Section VIII, Division 2, 2007 Edition and Fitness-For-Service Codes, API 579-1/ASME FFS-1, 2007 Edition with Applications,” EuroJoin7, 2009.
66. Staats, J.C., Osage, D.A., “Determination of Fracture Arrest Stress,” Proceedings of PVP2009, 2009 ASME Pressure Vessels and Piping Division Conference, July 26-30, 2009, Prague, Czech Republic, PVP2009-77998, pages 1-13, 2009.
67. Osage, D.A., ASME Section VIII Division 2 Criteria and Commentary, PTB-1-2009, ASME, New York, NY, 2009.
68. Osage, D.A., Rossi, S.J., “Pressure Builds for User-Friendliness,” Mechanical Engineering, May 2009.
69. Osage, D.A., D’Urso, U., “Health Care for Aging Equipment,” Mechanical Engineering Magazine, June 2008.
70. Osage, D.A., Janelle, J.L., “API 579-1/ASME FFS-1 2007 – A Joint API/ASME Fitness-For-Service Standard for Pressurized Equipment,” ASME PVP Conference, 2008.
71. Buchheim, G., Osage, D.A., Staats, J., “Development of Fitness-for-Service Rules for the Assessment of HIC and SOHIC Damage in API 579-1/ASME FFS-1,” PVP2008-61753 Proceedings of the ASME 2008 Pressure Vessels and Piping Conference, PVP-2008, Chicago, IL, July 27–31, 2008.
72. Osage, D.A., Janelle, J., “API 579-1/ASME FFS-1 2007: A Joint API/ASME Fitness-for-Service Standard for Pressurized Equipment,” PVP2008-61796, Proceedings of the ASME 2008 Pressure Vessels and Piping Conference, PVP-2008, Chicago, IL, July 27–31, 2008.
73. Pastor, T.P., Osage, D.A., “Modernization of Pressure Vessel Design Codes ASME Section VIII, Division 2, 2007 Edition,” ESOPE Conference, Paris, France, 2007.
74. Osage, D.A., Henry, P.A., “Recent Developments and Technology Improvements in API Risk-Based Inspection Planning Technology,” ESOPE Conference, Paris, France, 2007.
75. Staats, J., Buchheim, G., Osage, D.A., Development of Fitness-For-Service Rules for the Assessment of Hydrogen Blisters, HIC and SOHIC, WRC Bulletin 531, The Welding Research Council, New York, NY, 2007.
76. Janelle, J, Osage, D.A., “Validation and Development of Fitness-for-Service Assessment Procedures for Local Thin Areas in API RP579,” PVP2007-26293, Proceedings of the ASME 2007 Pressure Vessels and Piping Conference, San Antonio, TX, July 22–26, 2007.
77. Osage, D.A., “API 579-1/ASME FFS-1 2007 – A Joint API/ASME Fitness-For-Service Standard for Pressurized Equipment,” ESOPE Conference, Paris, France, 2007.
78. Pastor, T.P., Osage, D.A., “Modernization of Pressure Vessel Design Codes ASME Section VIII, Division 2, 2007 Edition,” ASME Journal of Pressure Vessel Technology, Technical Briefs, Vol. 129, pages 754-758, 2007.
79. Osage, D.A., Prager, M., “Recent Developments and Improvements in API 579,” FITNET International Conference, 2006.
80. Janelle, J.L., Osage, D.A., Burkhart, S.J., An Overview and Validation of the Fitness-For-Service Assessment Procedures for Local Thin Areas, WRC Bulletin 505, The Welding Research Council, New York, NY, 2005.
81. Mokhtarian, K., Osage, D.A., Janelle, J.L., Juliano, T., Design of Torispherical and Ellipsoidal Heads Subjected to Internal Pressure, WRC Bulletin 501, The Welding Research Council, New York, NY, 2005.
82. Osage, D.A., “Update on the Development of a Joint API/ASME Fitness-For-Service Standard for Pressurized Equipment,” ASME PVP Conference, 2005.
83. Osage, D.A., “Development of Joint API/ASME Fitness-For-Service Standard for Pressurized Equipment,” IIW Prague Conference, 2005.
84. Osage, D.A., Pastor, T.P., and Karcher, G.G., “An Overview on the Status and Developments of the New ASME Section VIII, Division 2 Pressure Vessel Code,” ESOPE Conference, Paris, France, 2004.
85. Osage, D.A., “Development of a Joint API/ASME Fitness-For-Service Standard for Pressurized Equipment”, ESOPE Conference, Paris, France, 2004.
86. Osage, D.A., Buchheim, G.M., and Brown, R.G., “Overview of Current Status and Use of the API 579 Fitness-For-Service Standard,” IMechE, 2003.
87. Osage, D.A., “New Developments in API 579,” ASME PVP-Vol. 453, Pressure Vessel and Piping Codes and Standards, Vol. 453, pages 239-244, 2003.
88. Osage, D.A., “An Overview of the New ASME Section VIII, Division 2 Pressure Vessel Code,” ASME PVP-Vol. 453, Pressure Vessel and Piping Codes and Standards, Vol. 453, pages 219-221, 2003.
89. Osage, D.A., “API 579 – A Comprehensive Fitness-For-Service Standard,” ASME PVP-Vol. 463, Flaw Evaluation, Service Experience, and Reliability, Vol. 463, pages 71-84, 2003.
90. Osage, D.A., “API 579: A Comprehensive Fitness-for-Service Standard” PVP2003-2028, Proceedings of the ASME 2003 Pressure Vessels and Piping Conference, PVP-2003, Cleveland, OH, July 20-24, 2003.
91. Dong, P., Hong, J.K., Osage, D.A., Prager, M., Master S-N Curve Method for Fatigue Evaluation of Welded Components, WRC Bulletin 474, The Welding Research Council, New York, NY, 2002.
92. Anderson, Ted L., Thorwald, G., Revelle, D.J., Osage, D.A., Janelle, J.L., and Fuhry, M.E., Development of Stress Intensity Factor Solutions for Surface and Embedded Cracks in API 579, WRC Bulletin 471, The Welding Research Council, New York, NY, 2002.
93. Alvarado, G.C. and Osage, D.A., “API RP 579 (Fitness-For-Service) and Application in the Refining and Petrochemical Industries,” 5th Annual Symposium, Mary Kay O’Connor Process Safety Center, “Beyond Regulatory Compliance: Making Safety Second Nature,” Reed Arena, Texas A&M University, College Station, Texas, October 29-30, 2002.
94. Osage, D.A., Reynolds, J.T., Kaley, L.C., “Risk-Based Asset Management for the Petroleum Industry,” JPVRC Symposium, PVRC/EPERC/JPVRC Joint Workshop, Sanjo Kaikan in the University of Tokyo, April 16-17, 2002.
95. Osage, D.A., “The Development of a New Pressure Vessel Code for ASME,” JPVRC Symposium, PVRC/EPERC/JPVRC Joint Workshop, Sanjo Kaikan in the University of Tokyo, April 16-17, 2002.
96. Osage, D.A., Janelle, J.L., Porowski, J.S., “Limit Analysis of Shells with Random Pattern of Spread Pits,” PVP2002-1301, PVP-Vol. 441, Computational Mechanics: Developments and Applications – 2002, ASME, 2002.
97. Dong, P., Hong, J.K., Osage, D.A., Prager, M., “Fatigue of Piping and Vessel Welds: ASME’s FSRF Rules Revisited,” ASME PVP Conference, 2002.
98. Osage, D.A., Krishnaswamy, P., Stephens, D.R., Scott, P., Janelle, J., Rohan, R., Wilkowski, G.M., Technologies for the Evaluation of Non-Crack-Like Flaws in Pressurized Components – Erosion/ Corrosion, Pitting, Blisters, Shell Out-Of-Roundness, Weld Misalignment, Bulges and Dents, WRC Bulletin 465, The Welding Research Council, New York, NY, 2001.
99. Osage, D.A., “The Development of a New Pressure Vessel Code for ASME,” ASME PVP Conference, 2001.
100. Dong, P., Hong, J.K., Osage, D.A., Prager, M., “Fatigue of Piping and Vessel Welds: AMSE’s FSRF Rules Revisited,” Proceedings of ASME International Conference on Pressure Vessel and Piping, August 4-8, 2001, Vancouver, BC, Canada, pages 1-20, 2001.
101. Osage, D.A., Prager, M., Cohn, M., “Service Experience and Fitness-For-Service in Power and Petroleum Processing: Presented at the 2000 ASME Pressure Vessels and Piping Conference,” Seattle, WA, July 23-27, 2000.
102. Osage, D.A., Shipley, K.S., Wirsching, P.H., Mansour, A.E., “Application of Partial Safety Factors for Pressure Containing Equipment,” Proc. ASME Pressure Vessel and Piping Conference, Seattle, WA, 2000.
103. Wirsching, P.H., Nguyen, H.P., Osage, D.A., Mansour, A.E., “Probability Based Fitness-For-Service for Pressure Vessels and Piping,” Proc. 8th ASCE Specialty Conference on Probabilistic Mechanics and Structural Reliability, University of Notre Dame, 2000.
104. Osage, D.A., “Application of new code will extend equipment lives,” Oil & Gas Journal, Vol. 98.21, pages 84-87, May 2000.
105. Anderson, T.L., Osage, D.A., “API 579: A Comprehensive Fitness-For-Service Guide,” International Journal of Pressure Vessels and Piping 77, pages 953-963, 2000.
106. Brown, R.G., Osage, D.A., Janelle, J.L., Buchheim, G.M., “Update of Ring Joint Cracking FFS Technologies,” ASME PVP Conference, 2000.
107. Dong, P., Osage, D.A., Prager, M., “Development of Weld Residual Stress Distributions for Fitness-For-Service,” ASME PVP Conference, 2000.
108. Osage, D.A., Brown, R.G., Janelle, J.L., “Fitness-For-Service Rules for Shell Distortions and Weld Misalignment in API 579,” ASME PVP Conference, 2000.
109. Osage, D.A., Janelle, J. and Henry, P.A., “Fitness-For-Service Local Metal Loss Assessment Rules in API 579,” PVP Vol. 411, Service Experience and Fitness-For-Service in Power and Petroleum Processing, ASME, pp. 143-176, 2000.
110. Osage, D.A., “Overview of API 579 Technology,” ASME PVP Conference, 2000.
111. Andreani, J.L., and Osage, D.A., “Fitness-for-Service Assessments of Aboveground Storage Tanks,” API Storage Tank Conference, 2000.
112. Osage, D.A., “Update on API 579 Recommended Practice for Fitness-For-Service,” IMechE, 1999.
113. Brown, R.G., Buchheim, G.M., Osage, D.A., and Janelle, J.L., “Fitness-For-Service Evaluation of Ring Joint Groove Cracking,” ASME PVP Conference, 1999.
114. Sims, R.J., Osage, D., “PVRC Studies of Local Thin Areas for Continuing Operation of Equipment,” ASME PVP-Vol. 380, Fitness-for-Service Evaluations in Petroleum and Fossil Power Plants, Vol. 380, pages 169-175, 1998.
115. Osage, D.A., Prager, M., “Strategy for Pressure Vessel Assessment,” ASME PVP-Vol. 380, Fitness-for-Service Evaluations in Petroleum and Fossil Power Plants, Vol. 380, pages 85-93, 1998.
116. Scott, P.M., Anderson, T.L., Osage, D.A., and Wilkowski, G.M., Review of Existing Fitness-For-Service Criteria for Crack-Like Flaws, WRC Bulletin 430, The Welding Research Council, New York, NY, 1998.
117. Scott, P., Wilkowski, G.M., Anderson, T.L., Osage, D.A., “A Review and Validation of Existing Flaw Evaluation Criteria for Crack-Like Flaws for Pressure Retaining Equipment,” ASME PVP-Vol. 359, Fitness for Adverse Environments in Petroleum and Power Equipment, Vol. 359, pages 151-169, 1997.
118. Scott, P., Wilkowski, G.M., Anderson, T.L., Osage, D.A., “Issues Related to the Development of a Fitness-For-Service Standard for Crack-Like Flaws,” ASME PVP-Vol. 359, Fitness for Adverse Environments in Petroleum and Power Equipment, Vol. 359, pages 135-149, 1997.
119. Osage, D.A., Prager, M., “Status and Unresolved Technical Issues of Fitness-For-Service Assessment Procedures for the Petroleum Industry,” ASME PVP-Vol. 359, Fitness for Adverse Environments in Petroleum and Power Equipment, Vol. 359, pages 117-128, 1997.
120. Stephens, D.R., Krishnaswamy, P., Mohan, R., Osage, D.A., Wilkowski, G.M., “A Review of Analysis Methods and Acceptance Criteria for Local Thinned Areas in Piping and Piping Components,” ASME PVP-Vol. 359, Fitness for Adverse Environments in Petroleum and Power Equipment, Vol. 359, pages 55-65, 1997.
121. Dobis, J.D., Buchheim, G.M., Brown, R.G., Osage, D.A., “Failure of Seam-Welded Low-Chrome Refinery Piping,” Materials Performance, NACE International Publication, Vol. 34, No. 12, pages 61-64, 1995.
122. Dobis, J.D., Brown, R.G., Osage, D.A., Buchheim, G.M., “High Temperature Failure of Long-Seam Welded Low Chrome Piping in Catalytic Reforming Service,” The NACE International Annual Conference and Corrosion Show, Paper No. 332, pages 332/1-332/16, 1995.
123. , Buchheim, G.M., Brown, and R.G., Poremba, J., “An Alternate Approach for Inspection Scheduling Using the Maximum Allowable Working Pressure for Pressurized Equipment,” ASME PVP–Vol. 288, American Society of Mechanical Engineers, New York, NY, pp. 261–273, 1994.
124. Buchheim, G.M., Osage, D.A., Brown, R.G., Dobis, J.D., “Failure Investigation of a Low Chrome Long-Seam Weld in a High-Temperature Refinery Piping System,” ASME PVP-Vol. 288, Service Experience and Reliability Improvement: Nuclear, Fossil and Petrochemical Plants, pages 363-373, 1994.
125. Buchheim, G.M., Osage, D.A., Warke, W.R., Prager, M., “Update on Fitness-For-Service and Inspection for the Petrochemical Industry,” ASME PVP-Vol. 288, Service Experience and Reliability Improvement: Nuclear, Fossil and Petrochemical Plants, Vol. 288, pages 253-260, 1994.
126. Osage, D.A., Davis, R.C., Brown, R.G., Andreani, J.L., “Use of Nonlinear Analysis Techniques in Fitness-For-Service Assessments in the Refining Industry,” ASME PVP-Vol. 277, Recertification and Stress Clarification Issues, Vol. 277, pages 143-161, 1994.
127. Buchheim, G.M., Osage, D.A., “Fitness-For-Service Evaluation of a Refinery Pressure Vessel,” ASME PVP-Vol. 261, Service Experience and Life Management: Nuclear, Fossil and Petrochemical Plants, Vol. 261, pages 265-274, 1993.
128. Buchheim, G.M., Osage, D.A., Prager, M., Warke, W.R., “Fitness-For-Service and Inspection for the Petrochemical Industry,” ASME PVP-Vol. 261, Service Experience and Life Management: Nuclear, Fossil and Petrochemical Plants, Vol. 261, pages 245-256, 1993.
129. Osage, D.A., Cacciatore, P.J., “Improved Reliability of High Temperature Cyclic Piping Systems Through State-of-the-Art Design and Analysis,” API 1986 Proceeding-Refining Department, 51st Midyear Meeting, Vol. 65, pages 665-677, 1986.

Conference and Training Presentations:

1. “A Fracture Mechanics-Based Approach to Establish Minimum Pressurization Temperature Envelopes,” presented by D.A. Osage, P.E. Prueter, and S.R. Kummari at the 2017 ASME PVP Conference, Hilton Waikoloa Village, Waikoloa, HI, July 16-20, 2017.
2. “Fatigue Assessment for In-Service Components – A New Part for API 579-1/ASME FFS-1 Fitness-For-Service,“ Fatigue Design 2015 – 6th Edition of the international conference on fatigue design – Senlis, France – November 18, 2015.
3. “Using API Standards for Life-Cycle Management of Fixed Equipment,” AFPM 2013 Reliability & Maintenance Conference and Exhibition, May 21, 2013, Orlando, Florida.
4. “API 579-1/ASME FFS-1 Fitness-For-Service Short Course,” API Inspection Summit, Jan, 2013, Galveston, Texas.
5. “Fitness-For-Service Professional Development Seminar,” AFPM 2012 Reliability & Maintenance Conference and Exhibition, May 22, 2012, San Antonio, Texas.
6. “Using International Standards to Support the Life-Cycle Management of Pressurized Fixed Equipment,” TAPPI OpEx Seminar, Operating Excellence through Advanced Asset Management, Organized by TAPPI’s Asset Management Committee, May 2-3, 2011 in Covington, KY, (Co-located with PaperCon).
7. “Workshop A Integrating Industry Standards into the Life-Cycle Management of Equipment,” 6th Annual Asset Integrity Management Summit, 20 – 23 March, 2011, Sheraton Abu Dhabi Hotel & Resort, UAE.
8. “Using International Standards to Support the Life-Cycle Management of Pressurized Fixed Equipment”, Summit Day 2: Monday 21 March 2011, 6th Annual Asset Integrity Management Summit, 20 – 23 March, 2011, Sheraton Abu Dhabi Hotel & Resort, UAE.
9. “Life-Cycle Management of Pressurized Fixed Equipment” presented by D.A. Osage at the European Symposium on Pressure Equipment 9-10 October 2010, Palais des Congrès de Paris, Paris, France.
10. “Background to the Development of ASME B&PV Code Case 2605 – Extension Of 2.25cr-1Mo-V Alloy into the Creep Range” Presented by M. Prager and D.A. Osage at the European Symposium on Pressure Equipment 9-10 October 2010, Palais des Congrès de Paris, Paris, France.
11. “Technical Basis of Material Toughness Requirements in the ASME B&PV Code, Section VIII, Division 2” Presented by M. Prager and D.A. Osage at the European Symposium on Pressure Equipment 9-10 October 2010, Palais des Congrès de Paris, Paris, France.
12. “An Overview of Fitness-For-Service Technology” presented by D.A. Osage at SIRIM, Kuala Lumpur, Malaysia, 14 July 2010.
13. The Effects of Industry Groups on the Development of Regulations in Integrity Management” presented by D.A. Osage at the DOSH Seminar, Kuala Lumpur, Malaysia, 13 July 2010.
14. “Developing International Standards for Life-Cycle Management” present by D.A. Osage at Bringing API-U Training to Malaysia Kuala Lumpur, Malaysia, 12 July 2010.
15. “Life-Cycle Management of Fixed Equipment Using the Latest API and ASME Codes and Standards” presented by D.A. Osage at the Oil & Gas Maintenance Technology Conference North America, Hilton New Orleans Riverside, September 1-3, 2009.
16. “Overview of the 2007 ASME Section VIII, Division 2, Pressure Vessel Code,” presented by D.A. Osage at the VMA Technical Seminar & Exhibit, Charleston, South Carolina, March 5-6, 2009.
17. “The Effects of Industry Groups on the Development of Regulations in Integrity Management” presented by D.A. Osage at the 2009 Integrity Management Summit Omni Houston Hotel Westside, February 11, 2009.
18. “Integrating FFS and RBI” presented by D.A. Osage at the API RBI European Workshop Hilton Milan, Milan, Italy, October 27-31, 2008.
19. “Fixed Equipment Integrity Management” present by D.A Osage at the ASME Workshop on Post Construction Standards Marriott West Loop at the Galleria, March 17-18, 2009.
20. “API 579-1/ASME FFS-1 2007 – A Joint API/ASME Fitness-For-Service Standard For Pressurized Equipment” presented by D.A. Osage at ASME/USCG Workshop on Marine Technology and Standards Sheraton National Hotel, Washington DC June 3-4, 2008.
21. “An Overview of the New ASME Section VIII, Division 2 Pressure Vessel Code,” presented by D.A. Osage at the Sheraton Cavalier Hotel, 2620 32nd Avenue, NW, Calgary, Alberta, Canada, May 6, 2008.
22. “An Overview of the New ASME Section VIII, Division 2 Pressure Vessel Code,” presented by D.A. Osage at the Hilton Houston Westchase , 9999 Westheimer Road, Houston, Texas, February 20-21, 2008.
23. “Overview of ASME Section VIII, Division 2, 2007 Addenda,” presented by D.A. Osage at the New ASME Section VIII, Div 2 Seminar, Tokyo, Japan, December 4-5, 2007.
24. “Overview of ASME Section VIII, Division 2, 2007 Addenda,” presented by D.A. Osage at the Engineers Australia, Perth, Australia, November 2, 2007.
25. “API 579-1/ASME FFS-1 2007, A Joint API/ASME Fitness-For-Service Standard for Pressurized Equipment,” presented by D.A. Osage at the Engineers Australia, Perth, Australia, November 2, 2007.
26. “Modernization of Pressure Vessel Design Codes ASME Section VIII, Division 2, 2007 Edition” presented by D.A. Osage at the European Symposium on Pressure Equipment 9-10 October 2007, Palais des Congrès de Paris, Paris, France.
27. “Recent Developments And Technology Improvements In API Risk-based Inspection Planning Technology” presented by D.A. Osage at the European Symposium on Pressure Equipment 9-10 October 2007, Palais des Congrès de Paris, Paris, France.
28. “API 579-1/ASME FFS-1 2007 – A Joint API/ASME Fitness-For-Service Standard For Pressurized Equipment” presented by D.A. Osage at the European Symposium on Pressure Equipment 9-10 October 2007, Palais des Congrès de Paris, Paris, France.
29. “An Overview of the New ASME Section VIII, Division 2 Pressure Vessel Code,” presented by D.A. Osage at the ASME Seminar, Milan, Italy, October 4-5, 2007.
30. “An Overview of the New ASME Section VIII, Division 2 Pressure Vessel Code,” presented by D.A. Osage at the ASME Consultants Meeting, San Francisco, CA, August 2, 2007.
31. “API 579-1/ASME FFS-1 2007 – A Joint API/ASME Fitness-For-Service Standard For Pressurized Equipment,” presented by D.A. Osage at the ASME Pressure Vessels and Piping Conference, 27-31 July 2007, Chicago, Illinois.
32. “An Overview of the New ASME Section VIII, Division 2 Pressure Vessel Code,” presented by D.A. Osage at the API Exploration & Production Standards Conference on Oilfield Equipment and Materials, Technical Session 1: Applications of Standards Research, San Francisco, CA, June 26, 2007.
33. “Technical Background of API/LTA Assessment Procedures” presented by D.A. Osage at the PAJ / JPCA FFS Seminar Tokyo, Japan, April 3-4, 2007.
34. “New FFS Methods in API 579-1/ASME FFS-1Fitness-For-Service Standard” presented by D.A. Osage at the PAJ / JPCA FFS Seminar Tokyo, Japan, April 3-4, 2007.
35. “Proposed New Fatigue Rules for API/ASME Codes” presented by D.A. Osage at the PVRC Conference New Tools for Dealing with Fatigue of Structures, Sofitel Houston, Houston, Texas, October 10-12, 2006.
36. “Recent Development and Improvements in API 579” presented by D.A. Osage at the FITNET 2006International Conference on Fitness-For-Service” May 17-19, 2006 Amsterdam, The Netherlands.
37. “Fitness-For-Service and Risk-Based Inspection, Complementary Technologies for Asset Management” presented by D.A. Osage at the API/PVRC International Conference on Decision Making for Risk Management of Process and Power Plants, Houston, Texas, October 18-20, 2005.
38. Update on the Development Efforts for API 579” presented by D.A. Osage at the FITNET Meeting Santander, Spain, September 22-23, 2005.
39. “Update on the Development of a Joint API/ASME Fitness-For-Service Standard for Pressurized Equipment,” presented by D.A. Osage at the ASME Pressure Vessels & Piping Division Conference, Denver, Colorado, July 17-21, 2005.
40. “Development of a Joint API/ASME Fitness-For-Service Standard for Pressurized Equipment” presented by D.A. Osage at the European Symposium on Pressure Equipment September 28, 29, and 30, 2004, Paris, France.
41. “An Overview on the Status and Development of the New ASME Section VIII, Division 2 Pressure Vessel Code” presented by D.A. Osage at the European Symposium on Pressure Equipment September 28, 29, and 30, 2004, Paris, France.
42. “Incorporation of Residual Stresses in Fitness for Service FAD Assessments Under API 579” presented by D.A. Osage at the PVRC Conference Understanding The Effects of Residual Stresses on Engineering Components – Modeling, Mitigating, Measuring, and Fitness-For-Service Applications, Marriott Savannah Riverfront, Savannah, Georgia, April 5-8, 2004.
43. “Creep Crack Growth And Cyclic Service” presented by D.A. Osage at the MPC/PVRC Conference On Elevated Temperature Behavior and Life Assessment of Components in the Creep Range, Houston, Texas, October 29-31, 2003.
44. “Overview of API 579, Part 10 Assessment of Components Operating in the Creep Range” presented by D.A. Osage at the MPC/PVRC Conference On Elevated Temperature Behavior and Life Assessment of Components in the Creep Range Houston, Texas, October 29-31, 2003.
45. “Life Assessments, Environments and Applications – Fitness-For-Service Assessment Of Components in Dynamically Loaded Situations – A Critical Discussion Of Methodologies” presented by D.A. Osage at the PVRC Conference New Approaches to Fatigue Design and Life Prediction, March 10-13, 2003, Atlanta, Georgia.
46. “API 579 – A Comprehensive Fitness-For-Service Standard,” presented by D.A. Osage at the 2003 ASME PVP Conference, Renaissance Tower City Center Hotel, Cleveland, Ohio, USA, Wednesday, July 23, 2003.
47. “Overview of FFS Procedures in API 579 and PVRC Div2 Rewrite,” presented by D.A. Osage at the 2003 ASME PVP Conference, Renaissance Tower City Center Hotel, Cleveland, Ohio, USA, Thursday, July 24, 2003.
48. “New Developments in API 579,” presented by D.A. Osage at the 2003 ASME PVP Conference, Renaissance Tower City Center Hotel, Cleveland, Ohio, USA, Tuesday, July 22, 2003.
49. “Report on Toughness Rule Development under Div 2 Rewrite,” presented by D.A. Osage and M. Prager at the ASME PVP, July 22, 2003.
50. “An Overview of the New ASME Section VIII, Division 2 Pressure Vessel Code,” presented by D.A. Osage at the 2003 ASME PVP Conference, Renaissance Tower City Center Hotel, Cleveland, Ohio, USA, Tuesday, July 22, 2003.
51. “Risk-Based Management for the Petroleum Industry” presented by D.A. Osage at the JPVRC Symposium 2002 (PVRC/EPERC/JPVRC Joint Workshop) April 16-17, 2002 Venue: Sanjo Kaikan in the University of Tokyo, Tokyo, Japan.
52. “Treating Wet H2S Damage Using API 579” presented by D.A. Osage at the PVRC Conference Managing Integrity of Equipment in Wet H2S Service PVRC Meetings: October 8-12, 1 2001, 2400 West Loop South, Houston TX.
53. “The Development Of A New Pressure Vessel Code For ASME,” presented by D.A. Osage at the 2001 ASME PVP Conference, Atlanta, Georgia, What’s New in The ASME Code – 2, Monday, July 23, 2001.
54. “Overview Of API 579” presented by D.A. Osage at the Worldwide Look at Fitness-for-Service Technology Sheraton Houston Brookhollow Hotel, 3000 North Loop West, Houston, TX, October 18 & 19, 2000.
55. “Application Of Partial Safety Factors For Pressure Containing Equipment,” presented by D.A. Osage at the ASME PVP 2000, Seattle, WA, July 2000.
56. “Assessment Of Weld Misalignment And Shell Distortions,” presented by D.A. Osage at the ASME PVP 2000 , Seattle, WA, July 2000.
57. “Fitness-For-Service Metal Loss Rules In API 579,” presented by D.A. Osage at the ASME PVP 2000, Seattle, WA, July 2000.
58. “Overview of API 579 Technology,” presented by D.A. Osage at the ASME PVP 2000, Seattle, WA, July 2000.